SBC8100 OMAP3530 Single Board Computer
SBC8100 Plus is now available with DM3730 CPU board Mini8510! Mini8510 hardware fully compatible with Mini8100!
Migrate from the OMAP3530 to DM3730!
- TI OMAP3530 Processor based on 600MHz ARM Cortex-A8 core (SBC8100)
- TI DM3730 Processor based on 1GHz ARM Cortex-A8 core (SBC8100 Plus)
- Memory supporting Up to 256MByte DDR SDRAM + 512MByte NAND Flash
- UART, USB, Ethernet, WiFi/Bluetooth, GPS, Camera, Audio, SD, Keyboard,...
- Supports 24-bit TFT LCD, VGA, S-Video/TV Output Display
- Ready-to-Run Linux2.6.32 and WinCE 6.0 (SBC8100)
- Ready-to-Run Linux2.6.32, Android 2.2 and WinCE 6.0 (SBC8100 Plus)
Hardware Features
 Mechanical Parameters
- Dimensions: 144.9mm x 114.1mm (expansion board)
67mm x 37mm (CPU board Mini8100 / Mini8510)
- Working temperature: 0~70 Celsius
- Humidity Range: 20% ~ 90%
- Power Consumption: 0.34A @ 5V
CPU Board (Mini8100 for SBC8100, Mini8510 for SBC8100 Plus)
Processor
- TI OMAP3530 microprocessor for SBC8100, 600MHz ARM Cortex-A8 Core, 412MHz TMS320C64x+ DSP Core (compatible with TI OMAP35x series processors)
- TI DM3730 DaVinci Digital Media Processor for SBC8100 Plus, 1GHz ARM Cortex-A8 Core, 800-MHz TMS320C64x+™ DSP Core (pin-to-pin compatible with TI AM3715)
Memory
Onboard Headers and Signals Routed to Pins
- 12-bit Camera interface (30-pin FPC connector, support CCD or CMOS camera)
- 1-channal 4-wire JTAG interface (10-pin 1.0mm pitch connector)
- 6 LEDs (programmable status LEDs, on CPU board)
- 2-channel SPI
- GPMC bus (16-bit data bus, 10-bit address bus, 4 chip-selection signals and several control signals)
- 3-channel 5-wire UARTs
- 1-channel ULPI (USB1 HS)
- Audio in/out
- 1-channel I2C
- 2-channel McBSP (McBSP1 and McBSP3, McBSP3 is multiplex with UART2)
- 2-channel SD/MMC: MMC1 (8-wire), MMC2 (4-wire)
- 24-bit DSS interface
Expansion Board
Audio/Video Interfaces
Data Transfer Interfaces and Other Facilities
- 10M/100M Ethernet port
- 1 three-wire RS232 Debug serial port
- 4 High-speed USB2.0 Host ports
- 1 High-speed USB2.0 OTG port (Can be only used as USB Device at present)
- WiFi/Bluetooth Module (WG7210, Bluetooth can only used for data transmitting at present)
- GPS Module
- SD/MMC card slot
- 4 Buttons (Boot, Reset, User, On/Off)
- 4*5 keyboard interface
- Expansion interface (2.0mm 30-pin SMT Female Pin Header, UART, I2C, SPI, ADC_IN, PWN_OUT are led out from this connector)
Software
Features
Note: WiFi/Bluetooth function is not working on SBC8100 Plus yet and can only be used on SBC8100 under WinCE OS.
| OS |
Item |
Feature |
Description |
| Linux |
Boot |
Version |
X-loader-1.41 U-boot 1.3.3 |
| Boot Mode |
Boot Linux from SD card, NAND Flash or Ethernet |
| Image update |
Support updating image from SD card or Ethernet |
| Logo update |
Support updating logo |
| Kernel and drivers |
Version |
Linux 2.6.32 (SBC8100)
Linux 2.6.32 (SBC8100 Plus) |
| File system Format |
Supports ROM/CRAM/EXT2/EXT3/FAT/NFS/ JFFS2/UBIFS file systems |
| Driver |
Serial, RTC, Net, Flash, LCD, Touch screen, S-Video, TV out, VGA, Audio In/Out, SD, USB Host, USB OTG, Keypad, GPS, LED |
| File system |
Format |
Ramdisk File System, UBI File System |
| Function |
Provided Lib (ALSA -lib, tslib, glibc), udev support |
| Demo |
Android |
Google developed a platform based on Linux open-source mobile phone operating system. |
| DVSDK |
Support MPEG4, MPEG2, H264, mp3, aac audio/video formats and Codecs |
| Android |
Kernel |
Android 2.2 |
Only provided for SBC8100 Plus |
| Drivers |
Serial, RTC, Net, Flash, LCD, Touch screen, Audio In/Out, SD, USB Host, USB OTG, Keypad, GPS, LED |
| 2D/3D (do not provide source code) |
| WinCE |
Boot |
Version |
x-load-1.41, eboot |
| Boot Mode |
Boot WinCE from SD card or NAND Flash |
| Image update |
Support updating image from SD card or Ethernet |
| System |
Characteristic |
KITL kernel debug, Reboot, Watchdog, RTC |
| Driver |
Serial, RTC, Net, Flash, LCD, Touch screen, S-Video, TV out, VGA, Audio In/Out, SD, USB OTG, USB Host, Keypad, WiFi/BT, GPS, LED, VRFB, DSPLINKK/CMEMK, PWM, ADC, GPIO/I2C/SPI/MCBSP |
| Function |
Power Management (backlight drive, battery-driven, sleep/wake-up function) |
| Hive registry support |
| ROM file system support |
| Software features |
Mediaplayer 9.0, Word and Internet Explorer 6.0 |
| .NET Compact Framework 3.5 |
General Description
Embest SBC8100 Single Board Computer is a high-performance controller board based on Texas Instruments’ OMAP3530 microprocessor introduced by Embest after Devkit8000 evaluation board. It is designed based on the Mini8100 CPU board which integrates an OMAP3530 microcontroller, 256MByte DDR SDRAM, 512MByte Nand Flash, RTC, LEDs and one Camera interface on board. The Mini8100 is connected with SBC8100 expansion board through two 1.27mm space 2*45-pin dip connectors.
The SBC8100 Plus integrates Mini8510 as the CPU board which compatible with Mini8100 but using TI's DM3730 as its CPU core board. This is convenient for customers who used SBC8100 or Mini8100 before to upgrade to SBC8100 Plus or Mini8510 so as to migrate from the OMAP3530 to DM3730 for their embedded designs.
In addition to those features provided by the CPU board, the expansion board has exposed many of other features of the OMAP3530 or DM3730. It has integrated RS232, USB, Ethernet, WiFi/Bluetooth, GPS, Audio In/Out, Keyboard, LCD, VGA, S-Video/TV out, SD card and more other functions on board. So many hardware resources provided by the expansion board, it becomes a solid reference board for customer design.
Embest also offers a complete software development package to customers. The board supports linux 2.6 and WindowsCE 6.0 operating systems and is provided with complete basic drivers which enable a quick channel to evaluate the TI OMAP3530 or DM3730 processor and customize application software. It would be an ideal development platform for multimedia and communication applications.
Add-on Hardware Options and Support OS
* = Provided with Source Code
# = Not Provided with Source Code
| SBC8100 OMAP3530 Single Board Computer |
| Item |
Description |
Interface to Board |
Linux |
WinCE |
| CAM8000-A |
Analog Camera Module |
Camera |
Support* |
Not yet |
| WF8000-U |
WiFi Module |
USB Host |
Support* |
Not yet |
| CDMA8000-U |
3G Module
(CDMA2000 standard) |
USB Host |
Support* |
Support* |
| WCDMA8000-U |
3G Module
(WCDMA standard) |
USB Host |
Support* |
Support* |
| CAM8000-D |
Digital Camera Module |
Camera |
Not yet |
Support# |
| CAM8100-U |
Digital Camera Module |
USB Host |
Support* |
Support* |
| XDS100v2 |
Emulator for debugging |
JTAG |
|
| SBC8100 Plus DM3730 Single Board Computer |
| Item |
Description |
Interface to Board |
Linux |
Android 2.2 |
WinCE |
| CAM8000-A |
Analog Camera Module |
Camera |
Support* |
Not yet |
Support* |
| WF8000-U |
WiFi Module |
USB Host |
Support* |
Support* |
Support# |
| CDMA8000-U |
3G Module
(CDMA2000 standard) |
USB Host |
Support* |
Support* |
Support# |
| WCDMA8000-U |
3G Module
(WCDMA standard) |
USB Host |
Support* |
Not yet |
Support# |
| CAM8000-D |
Digital Camera Module |
Camera |
Support# |
Support# |
Support* |
| CAM8100-U |
Digital Camera Module |
USB Host |
Support* |
Support* |
Support# |
| LVDS8000 |
LVDS Module |
LCD |
Support* |
Support* |
Support* |
| XDS100v2 |
Emulator for debugging |
JTAG |
|
Other Relative
Documents and Links
 SBC8100 board overview
 Embest Mini8510 Processor Card
Embest Mini8100 Processor Card
TI DM3730 datasheet
TI OMAP3530 datasheet
Customer Design ServiceEmbest also offers customer design service based on the SBC8100 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience.
Order Information |
| Order No. |
T6010092 |
| Item |
Embest SBC8100 Single Board Computer
|
| Deliveries |
- One SBC8100 or SBC8100 Plus board (including CPU board and expansion board)
- One 2GB SD card
- One Serial cable
- One net cable
- One USB cable (Type A Male to Type Mini-B Male)
- One S-Video cable
- One JTAG board (convert 10-pin to 14-pin JTAG interface)
- One 5V@2A Power adapter
- One GPS antenna
- One Product CD (including user manual, schematic in PDF format, datasheet, Linux, Android and WinCE BSP)
- Optional 4.3"/7" TFT LCD (With Touch panel)
Remark: 4.3” LCD (resolution: 480*272), 7" LCD (resolution: 800*480)
|
| Remark |
Please specify SBC8100 or SBC8100 Plus you need when placing orders. |
| Price |
without LCD |
US$469 |
| with 4.3"LCD |
US$579 |
| with 7"LCD |
US$599 |
| Discount price is available for SBC quantity order |
| Options |
- CAM8000-A Analog Camera Module(Only support linux, provided with Linux driver source code, supporting analog camera with BNC connector and PAL or NTSC video output) US$35
- Analog Camera (work with CAM8000-A) US$60
- WF8000-U USB WiFi module US$39
- CAM8100-U USB Digital Camera Module US$39
- CAM8000-D Digital Camera Module US$39
- CDMA8000-U USB 3G function module(CDMA2000 standard) US$79
- WCDMA8000-U USB 3G function module (WCDMA standard) US$79
- XDS100v2 USB JTAG Emulator US$69
- DVD (Code Composer Studio V4 Installation Software) US$2
|
| Order online |
Buy Now  |
| P.O |
Print the order form, complete and fax to us. Also fax your T/T receipt. We will deal with your order once we receive your orderform and T/T receipt.
Order form in pdf  Order form in MS word |
| Other TI Series Products |
|
| Contact Us |
  |
|
Home
