SBC6020 Single Board Computer
- 400MHz Atmel AT91SAM9G20 ARM926EJ-STM Microcontroller
- On Board 64MB SDRAM + 128MB Nand Flash + 4MB Nor Flash
- 7 Serial Ports, 2 Ethernet Ports, USB, CAN, CF Card Slot, Mini-PCI Slot …
- Ready-to Run Linux 2.6.30 OS
 SBC6020 Overview Atmel AT91SAM9G20 Datasheet
Hardware Features
- Dimensions: 150mm x 106mm
- Power supply: +12V
- Working temperature: -10~70°C
- Processor: Atmel AT91SAM9G20 (ARM926EJ-STM core with MMU capable of 400MHz operation)
- 64Mbyte SDRAM
- 128Mbyte Nand Flash (support up to 256Mbyte, bootable)
- 4Mbyte Nor Flash (bootable)
- 2Kbit EEPROM
- 2 10M/100M Ethernet ports
- 7 serial ports (Debug: 3-wire RS232 serial port, COM0: 5-wire RS232/TTL serial port, COM1: 5-wire RS485 serial port, COM2: 5-wire RS232/TTL serial port, COM3/4/5: 3-wire RS232/TTL serial port)
- 2 USB2.0 full-speed (12 Mbits/S) Host ports
- 1 USB2.0 full-speed (12Mbits/S) Device port
- 1-channel CAN2.0 Bus
- 4-channel 10-bit ADC
- RTC (battery backed)
- CF card socket
- Mini-PCI interface (SDIO, SPI, COM2 and USB Host are led out through this interface)
- Buzzer
- LEDs
- 1 Reset button
- Watchdog timer
- 8 GPIOs (can be used as 4*4 keyboard or independent IOs)
- 20-pin JTAG interface
Software Features
| OS |
Item |
Feature |
Description |
| Linux |
Boot |
Version |
u-boot 1.3.4 |
| Boot Mode |
Boot from NAND Flash or Nor Flash |
| Download Mode |
Download kernel and file system from SAM-BA or Ethernet |
| Kernel and drivers |
Version |
Linux 2.6.30 |
| File system |
Support ROM/CRAM/EXT2/RAMDISK/YAFFS2/FAT32 |
| Driver |
Serial, RTC, NET, LED, RS485, CAN, SD, Buzzer, USB, Keypad, EEPROM, GPIO, CF, Watchdog |
| File System |
File System |
yaffs2 file system, can be read and written |
| Network protocol and applications |
TCP/IP |
Complete TCP/IP protocol |
| System configuration and service |
Network Ping |
Ping command, used in checking system |
| Basic command |
Ifconfig, route, inetd |
Used for Network configuration and service programs |
| Linux command |
cat, chmod, discard, echo, flashwrite, flashfsd, free, genhtml, init, kill, loader, Ls, mkdir, mount, ps, reboot, rm, smanaged, sysconf, yes, insmod, lsmod, rmmod |
General Description
Embest SBC6020 Single Board Computer is based on the Atmel AT91SAM9G20 microprocessor which contains an ARM9 core with built-in Ethernet MAC and seven Serial ports, targeted for high performance embedded industrial applications with high constraints on power consumption.
Embest SBC6020 Single Board Computer exposes all features of the AT91SAM9G20 microprocessor and supports many standard interfaces and peripheral devices including USB Host/Device, Ethernet, CAN, SPI, Serial ports, CF card slot, ADC, JTAG, GPIO, Mini-PCIe interface and more over. The Mini-PCIe interface has integrated SDIO, SPI, UART and USB signals. Customer can attach 3G module, GPS module, GPRS/GSM module and WiFi/Bluetooth module to this interface.
The board is capable of supporting Linux 2.6.30 open-source operating system. The system can boot from either Nand Flash or Nor Flash. It is pre-installed with the U-Boot boot loader. Embest provides all drivers in source code and together with user manual and some other tools and documents to help customer immediately start with their code development. It is an already device which can be used directly by customers for their embedded applications.
Function Block Diagram
Onboard Interfaces and Connectors
Other Relative Documents and Links
Dimension Drawing (Top View)
Dimension Drawing (Bottom View)
Customer Design ServiceEmbest also offers customer design service based on the SBC6020 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience.
|
Home
or 