Mini2410-III Processor Card
- CPU Core Board based on 266MHz Samsung S3C2410A ARM920T Microcontroller
- On Board 64MB SDRAM + 64MB Nand Flash + 2MB Nor Flash + 128KB SRAM
 
Top View Back View
 Mini2410-III Overview Samsung S3C2410A datasheet
Features
- Dimensions: 56mm x 59.9mm
- Temperature: 0 to +70 Celsius
- Samsung S3C2410A microcontroller based on an ARM920T CPU core with MMU
- 64Mbyte SDRAM (32Mbyte optional)
- 64Mbyte Nand Flash (32Mbyte optional)
- 2Mbyte Nor flash
- 128Kbyte SRAM
- On-chip MPLL generates the 12MHz OSC up to operate MCU at up to 266MHz
- 32768Hz RTC (battery backed)
- 1.0mm space 8-pin JTAG interface
- LCD, AD, SPI, Uart, USB, SD/MMC Card, Ethernet (DM9000AE), IIS, I2C, RTC, PWM, GPIO, Local bus and all I/O CPU lines can be extended via two 4mm height 0.6mm space 140-pin board-to-board connectors.
Description
Embest Mini2410-III processor card measuring only 56mm by 59.9mm is an ideal embedded microprocessor solution. The tiny board is based on the Samsung S3C2410A ARM920T processor. The processor card takes full features of S3C2410A and the connection between the processor card and your carrier board is through two 4mm height, 0.6mm space and 140-pin Board-to-Board female connectors. A complete set of peripherals including LCD, AD, SPI, Uart, USB, SD/MMC Card, Ethernet (DM9000AE), IIS, I2C, RTC, PWM, GPIO, Local bus and all I/O CPU lines can be extended via two 4mm height 0.6mm space 140-pin board-to-board connectors. The fully expansion can be used adapted to customer requirements.
Integration of the Embest Mini2410-III processor card to customer special design is fully supported by Embest technologies. The processor card has no software on itself originally. Customers can develop the software according to their own designs. Embest also designed one PC/104 carrier board for this tiny CPU board, the whole kits is called EM104V1 and is provided with Linux2.6.14 BSP, customers can use it already if cater to your needs. Embest also offers professional custom software and hardware development and you can leverage our experience to increase your own productivity. This processor card provides users with a flexible development environment based on S3C2410A and a shortened development timeframe, which would be a best choice for developers.
Function Block Diagram
Mechanical Size
JTAG debug interface pin explanation
Embest Mini2410-III processor card uses an 8-pin JTAG debug interface to connect to your development system through debug cable or emulator for debugging. Detailed pin explanation is as following:
Pin |
Name |
Function explanation |
1 |
VDD33 |
Power 3.3V |
2 |
GND |
GND |
3 |
RESET |
Reset the target system |
4 |
nTRST |
Reset the TAP controller at start |
5 |
TCK |
Clock input for the JTAG logic |
6 |
TDI |
Serial port input for testing instructions and data |
7 |
TDO |
Serial port output for testing instructions and data |
8 |
TMS |
Control the sequence of the TAP controller's states |
140-pin Board-to-Board Connector
Embest Mini2410-III processor card is connected to carrier board via two 4mm height, 0.6mm space and 140-pin board-to-board connectors. You can use below connectors on your carrier board to connect with the Mini2410-III. It is convenient for your next design according to your own requirement. 
Other Relative Documents and Links
Mini2410-III Schematic drawing
Board to Board Connectors Datasheet
Customer Design Service
Embest also offers customer design service based on the Mini2410-III board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience.
|
Home
or 