| Dear Reader,
Welcome to the March Newsletter of Embest Company.
This month we are pleased to let you know something new about Embest:
|
 |
Capable of supporting both Linux2.6 and WinCE6.0 now!  |
Size: 141.4mm x 109.5mm (mother board)
67.6mm x 47mm (daughter board Mini9261-I) |
Working Temp.: 0~70 Celsius |
+5V DC power supply |
200MHz Atmel AT91SAM9261S (ARM926EJ-S core) |
64MB SDRAM, 256MB NandFlash, 4MB SPI Serial DataFlash, 8MB NorFlash, 1Kbit EEPROM |
4 Serial ports (RS232/TTL/RS485) |
| CAN2.0 interface |
| 10/100Mbps Ethernet port |
| 2 USB Host and 1 USB Device |
| Standard VGA display port (CH7026) |
| LCD and Touch screen interface |
| 4x4 keypad interface |
Battery backed RTC |
13 GPIOs |
SD card slot |
2 LEDs |
| 2 power indicators |
| 4 buttons (one for Wakeup, one for Reset) |
Audio input and output |
| 20-pin standard JTAG slot |
| SPI interface (multiplex with CAN interface) |
Providing Linux2.6 BSP and WinCE6.0 BSP |
|
|
 |
Size: 109.6mm x 80mm |
| Working Temp.: -20~85 Celsius |
| Marvell XScale PXA270 can work up to 520MHz |
| Power supply: 3500mAH Lithium battery |
| 3-pin Battery interface |
| Power charger interface |
| 128MByte SDRAM |
| 1GMByte MDOC (Disk-On-Chip) |
| One 9-wire RS232 serial port |
| One USB1.1 Host port and One USB1.1 Device port |
| Bluetooth antenna |
| Support wireless LAN |
| LCD interface |
| 4-wire touch screen interface |
| One mini SD card socket |
| Audio output port |
| RFID antenna interface |
| Barcode scanner interface |
| Two buttons (RESET and ON/OFF) |
| One 3-pin EXT KEY interface |
| Supporting WinCE6.0 |
|
More information can be found at our website: www.armkits.com
Please feel free to contact us if any items are of your interest.
If you would like to register for the newsletter, register here. Please do not reply to this email.
Best regards,
Embest Team
Embest Info&Tech Co.,LTD
E-mail contact: market@embedinfo.com
Website: http://www.armkits.com http://www.embedinfo.com
You are in our database as we have been in contact with you at sometime, perhaps at a trade fair, a networking event or via the website. If you feel like you have received this newsletter in error or would like to unsubscribe we apologize for this intrusion and please Unsubscribe now. |
