Site Mirror:   USA  |  China
  Home   Products   Service   Order   Support   Forum   Company   Download 
 

  Products

>>LCD8000-97C
 
>>EDM1070AR-01
 
>> Discover-MO:)
DM-STF4BB
 
>>BeagleBone-HDMI CAPE
 
>> Single Board Computer
SBC2416G
SBC8140
SBC8600B
SBC1788
SBC9261-I
SBC6000X
SBC6300X
SBC6020
  SBC6045
  SBC6245
  SBC6345
  SBC6845
  SBC2416-I
  SBC2440-III
  SBC2410-III
  SBC2100
  SBC8530
  SBC8018
  SBC8118
  SBC8100
  SBC8100 Plus
  SOC8200
   
>> CPU Core Boards
Mini8600B
Mini6245
Mini6045
Mini6300
Mini9261-I
Mini3250
Mini2100
  Mini2416-I
  Mini2440-I
  Mini2410-III
  Mini2410-II
Mini8100
Mini8510
Mini8118
 
>> Evaluation Boards
SABRE Lite
DevKit8600
DevKit8500D
DevKit8000
DevKit7000
DevKit3250
  DevKit1207
  S3CEV40
STDV710C
STDV711F
STDV730F
STDV750F
  ATEBSAM7S
  ATEB40x
   
>> USB Oscilloscope
 
>> HMI Solution
  TH056A1
  TH104A1
  TH070S1
   
>> MID Solution
  K7(OMAP3530)
   
>> Video Solution
  VSS3530
   
>> Software tools
Embest IDE
Flash Programmer
Register Editor
 
>> JTAG Emulators
Embest UNetICE
  XDS100v2
 
>> EmbestUniversity®
 

>> Earlier Products
Embest PowerICE
SAM6300i
SAM9260V1
ATEB9200
DevKit2000
SBC2410-I
S3CEB2410
SBC2442-I
EM104V1
Mini2410-I
SAM9315V1
NK9315
LPCEB2000
LPCEB2000-A
LPCEB2000-B
LPCEB2000-S
  STDV912F
  DevKit270
  PXA270DB

    Product Updates


 

DevKit3250 Evaluation Kit

- NXP LPC3250 Processor based on 266MHz ARM9EJ-S core
- Onboard 64MByte SDRAM + 128MByte NAND Flash + 4MByte Nor Flash
- 8 UARTs, IrDA, Ethernet, USB OTG, Audio, LCD, SD, 3 ADC, RTC, JTAG,...
- Ready-to-Run Linux2.6 OS

DevKit3250 Evaluation Board

Embest DevKit3250 Evaluation Board is deisgned based on Mini3250 processor card using NXP’s LPC3250 microprocessor which is built around a 90-nm, 266MHz ARM926EJ-S CPU core and a Vector Floating Point (VFP) coprocessor, designed for applications that require high performance, high integration, and low power consumption.

The CPU core board Mini3250 on Devkit3250, measuring only 75mm by 55mm, has integrated LPC3250 ARM926EJ core and  provided Multiple Storage Media including 64MB SDRAM, 128MB bytes NAND FLASH, 4MB Nor Flash. It also supports SD card and USB mass storage devices and has one power indicating LED, one programmable LED and one 40 pin TFT-LCD connector on board. It connects to Devkit3250 expansion board through two 2.0mm pitch 3-line 27-pin connectors. The expansion board has increased the core board’s I/Os capabilities. It brought out 8 UARTS, IrDA, Ethernet, Audio, ADC, RTC, Buzzer, Keys, EMC Bus and GPIOs.

The DevKit3250 board is preloaded with ready-to-run Linux OS. Embest offers Linux 2.6.27 BSP and all necessary documents and accessories with this Kit to effectively help with customer’s early development work. It can be also used directly into customer’s next design.

Hardware Features

Mechanical Parameters

    • Dimensions: 75mm x 55mm (CPU board Mini3250, 8 layer PCB design),
      165mm x 115mm (Expansion board)
    • Power Supply: DC Jack, +9V~+12V DC Input, Power Pin (Optional)
    • Working Temp.: -10~70°C

DevKit3250 CPU core Board (Mini3250)

Processor

    • NXP LPC3250 processor (Compatible with NXP LPC3220/LPC3230/LPC3240 processors)
      - 266MHz, 32-bit ARM926EJ-S core
      - Vector Floating Point coprocessor
      - Up to 256KB of internal SRAM and 32KB I-cache/32KB D-cache
      - External memory controller for DDR and SDR SDRAM, SRAM, and Flash
      - Available 10/100 Ethernet MAC
      - USB OTG with full-speed host and device capabilities
      - Available 24-bit LCD controller supports STN and TFT panels
      - Comprehensive set of serial interfaces
      - SD memory-card interface

Memory

    • 64MByte SDRAM
    • 128MByte NAND Flash
    • 4MByte Nor Flash

Onboard Headers and Other Facilities

    • One 40-pin LCD interface (with touch screen interface)
    • One Micro SD Card slot
    • One USB OTG 2.0 connector, mini-B type, with ESD protection
    • JTAG on the rear of the board (optional)
    • Two 2.0mm pitch 3-line 27-pin connectors (7 UARTs, Ethernet and all IOs are led out via the two connectors.)
    • 32768Hz RTC
    • Watchdog timer, supported with the microprocessor
    • One power indicator
    • One programmable LED

DevKit3250 Expansion Board

Data Transfer Interfaces

    • Serial Port
      - 4 x RS232 UARTs, DB9 Connector; TTL lead out with Pin Array (Optional)
      - 4 x TTL UARTs, lead out with Pin Array
      - 1 x IrDA
    • EMC Bus
      24 Bit Address Bus and 16 Bit Data Bus, CS, Reset, Read/Write, INT Signal
    • Ethernet:
      10/100Mbps, RJ45 connector with LED
    • I2C Type 2Kbit EEPROM

Input/Output Interfaces

    • One Reset Button
    • Four Programmable Buttons connecting with pin array
    • Three ADC Phoenix Terminal Interfaces
    • One 3.5mm Stereo Phone Jack
    • One 3.5mm Mic Jack
    • One 20-pin 2.54mm pitch JTAG interface
    • 23 IO Pins, including I2C, SPI, PWM etc.
    • RTC with Lithium Battery CR2032
    • One buzzer
    • Power Indicating LED

Software Features

OS Item Feature Description
Linux Bootloader Stage1Loader Boot

To boot U-boot from Nand Flash

Support updating u-boot, kernel, file system via Micro SD
U-boot Boot Start up system
Tftp Support tftp transmitting protocol
File system Support writing JFFS2/Yaffs file system image into nand flash
Kernel Support writing kernel image into nand flash
Kernel Parameter Support kernel parameter setting
Kernel and drivers Version Linux 2.6.27
File system Format EXT2/FAT/NFS/JFFS2/Yaffs
Driver Serial, IrDA, RTC, NET, Nand, LCD, Touch Screen, MMC/SD, USB OTG, Key, LED, Audio, Buzzer, I2C, I2S
Embedded GUI Qt/Embedded (Provide source code and image)
Network protocol
& application
TCP/IP TCP/IP protocol
File transfer (FTP Client/server)
Remote login Telnet protocol
Web server boa web server
Sample Program Demo Button, EEPROM, LED, Buzzer, UART

Function Block Diagram

Onboard Interfaces and Connectors

Relative Documentation and Links

DevKit3250 Evaluation Kit Overview

Mini3250 Processor Card Overview                         

 NXP LPC3250 datasheet

Dimension drawing of Devkit3250 board

Mini3250 Processor Card

Customer Design Service

Embest also offers customer design service based on the Devkit3250 board according to customer’s requirement. Whether you need to reduce, add or modify to existing hardware, Embest will help customers with expert competence and rich experience.

Order Information

Order No.

T6010097

Item Embest DevKit3250 Evaluation Kit
Hardware
  • One DevKit3250 Evaluation board
  • One 2G TF card
  • One USB cable
  • One DB9 Serial cable
  • One net cable
  • One 12V Power adapter
  • Optional LCD (including touch screen)
    4.3”LCD (resolution: 480*272), 7"LCD (resolution: 800*480)
Software and Documents
  • Documents (user manual, schematic drawing, Datasheet)
  • Linux 2.6.27 BSP
Price without LCD

US$159

with 4.3" LCD US$259
with 7" LCD US$279
Order online Buy Now
P.O Print the order form, complete and fax to us. Also fax your T/T receipt. We will deal with your order once we receive your orderform and T/T receipt.  
  Order form in pdf       Order form in MS word
Contact Us  
 Embest Technology Co., Ltd. Copyright © 2000-2014, All rights reserved.

Tower B 4/F, Shanshui Building, Nanshan Yungu Innovation Industry Park, Liuxian Ave. No. 1183, Taoyuan St., Nanshan District, Shenzhen, China(518055)
Tel: +86-0755-25635626-863/865/866/867   Fax: +86-0755-25635626-666 
www.embest-tech.com  www.timll.com  www.embedinfo.com 
Report any problems to the webmaster.

BEFORE PLACING ORDERS TO US PLEASE READ, UNDERSTAND AND AGREE TO THE TERMS AND CONDITIONS AS INCLUDED.